Zone Status Control Unit 868.35mhz Max 8 Receivers The Control Unit Activates The Load (pump/boiler) With At Least One Electronic Valve Open Power Supply 230v Ac 50hz Signal Level Indication Rf Colour White Perry-1txccrx01
Zone status control unit Power supply 230V AC 50Hz Output 1 potential-free deviation contact: 5(2) A/250V
Perry 1txccrx01 Control Unit For Controlling The Status Of The White Zones 8 Receivers The Control Unit Activates The Load Pumpboiler With At Least One Electronic Valve Open Power Supply 230v Ac 50hz
Customers Reviews Perry Perry-1TXCCRX01
Marcello Data: 12 January 2020 I had to replace my old radio frequency receiver, I needed a receiver that would allow me to store several thermostats and chronothermostats to control a boiler. I searched the net and found the Perry 1TXCCRX01 at an absolutely honest price. I review only now to emphasize that it is more than a year that I have mounted it without problems.
Zone status control unit 868.35MHz MAX 8 Receivers The control unit activates the load (pump/boiler) with at least one open electronic valve Power supply 230V AC. 50Hz RF signal level indication White color Perry 1TXCCRX01
Special features Zone 868.35MHz Power supply 230V AC 50Hz Output 1 contact in potential-free deviation: 5(2) A/250V Receiving frequency 868.35Mhz RF signal level indication White color Size (WxDxH) 133 x 25 x 90
Technical features
- Power supply 230V ac (50/60Hz) (Umin: 195Vac- Umax: 264Vac) - Device consumption 0.8VA max. - Outputs 1 relay - Resistive load applicable to output 1250W /250Vac (5A cos and #966--=1) (2A cos and #966--=0.6) - RF reception frequency 868.35MHz /-400KHz - Super heterodyne single conversion RF receiver type with integrated VCO and PLL - ASK receiver detection type (OOK) - Duration of the shortest decodable code bit 333µS /-10% - Receiver sensitivity >-106dBm - Mode of receiving signal from the ether via lamda antenna/4, internal or external to the device - Signaling of the level of the signal received by turning on the led bar, on three levels - Signalling of anomaly of the paired devices by flashing the ON led and the corresponding channel - Signalling of the status of the paired devices by turning on or off the relative channel leds - Signalling of the status of the pump output by turning on the relative channel leds led - Immunity to electromagnetic disturbances >10V/m between 1MHz and 1GHz - Resistance to electrostatic discharge 8KV for air discharge 4KV for contact discharge - Protection degree IP30 (wall mounting) - Normal pollution - Insulation type Class II - Operating temperature -20°C/ 70°C - Storage temperature -25°C/ 85°C - Wire cross-section at terminals 1mm² to 2,5mm² - Type of thermostatting ON/OFF with hysteresis band (differential)
Perry control unit to check the status of the white color zo Perry 1TXCCRX01
Zone Status Control Unit 868.35mhz Max 8 Receivers The Control Unit Activates The Load (pump/boiler) With At Least One Electronic Valve Open Power Supply 230v Ac 50hz Signal Level Indication Rf Colour White Perry-1txccrx01
Zone status control unit Power supply 230V AC 50Hz Output 1 potential-free deviation contact: 5(2) A/250V
Data: 12 gennaio 2021 Dovevo sostituire il mio vecchio ricevitore a radiofrequenza, avevo bisogno di un ricevitore che mi permettesse la memorizzazione di svariati termostati e cronotermostati per poter comandare una caldaia. Ho cercato in rete ed ho trovato il Perry 1TXCCRX01 ad un prezzo assolutamente onesto. Recensisco solo ora per sottolineare che è più di un anno che l'ho montato senza problemi.
Centralina di controllo stato delle zone 868,35MHz MAX 8 Ricevitori La centralina attiva il carico (pompa/caldaia) con almeno una valvola elettronica aperta Alimentazione 230V c.a. 50Hz Indicazione livello segnale RF Colore bianco Perry 1TXCCRX01
Caratteristiche peculiari Centralina di controllo stato delle zone 868,35MHz Alimentazione 230V c.a. 50Hz Uscita 1 contatto in deviazione libero da potenziale: 5(2) A/250V Frequenza di ricezione 868.35Mhz Indicazione livello segnale RF Colore bianco Dimensione (LxPxH) 133 x 25 x 90
Caratteristiche tecniche
· Alimentazione 230V ac (50/60Hz) (Umin: 195Vac- Umax: 264Vac) · Consumo del dispositivo 0,8VA max. · Uscite 1 a relè · Carico resistivo applicabile all’uscita 1250W /250Vac (5A cos e #966--=1) (2A cos e #966--=0,6) · Frequenza di ricezione RF 868,35MHz +/-400KHz · Tipo di ricevitore RF Super eterodina a conversione singola con VCO e PLL integrati · Tipo di rivelazione del ricevitore ASK (OOK) · Durata del bit di codice più corto decodificabile 333µS +/-10% · Sensibilità del ricevitore >-106dBm · Modo di ricezione del segnale dall’etere tramite antenna in lamda/4, interna o esterna al dispositivo · Segnalazione del livello del segnale ricevuto tramite accensione di barra led, su tre livelli · Segnalazione di anomalia dei dispositivi abbinati tramite lampeggio del led “ON” e del canale corrispondente · Segnalazione dello stato dei dispositivi abbinati tramite accensione o spegnimento dei relativi led di canale · Segnalazione dello stato dell’uscita pompa tramite accensione del relativo led · Immunità ai disturbi elettromagnetici >10V/m tra 1MHz e 1GHz · Resistenza alle scariche elettrostatiche 8KV per scariche in aria 4KV per scariche per contatto · Grado di protezione IP30 (montaggio a parete) · Polluzione normale · Tipo di isolamento Classe II · Temperatura di funzionamento -20°C/+70°C · Temperatura di stoccaggio -25°C/+85°C · Sezione dei fili ai morsetti da 1mm² a 2,5mm² · Tipo di termostatazione ON/OFF con banda d’isteresi (differenziale)
Perry control unit to check the status of the white color zo Perry 1TXCCRX01
Wall Mounted Radio Receiver 1 Zone Perry-1txrx01-p Ric. Rx 1 Zone Wall Mounting Receiving Frequency 868.35mhz Colour White Manual On/off Control Power Supply 230v Ac 50-60hz Output 1 Potential-free Deviation Contact 5(2)a/250v
Perry-1TXRX02-P Receiver 2 Zones With Pump Activation
Receiver 2 Zones - Wall With Pump Activation 30vac 50-60 Hz White Colour Dimensions 90x25x132 Mm Ip30 Carrier Reception Frequency 868,35 Mhz Manual On/off Control Signal Level Indicator Rf Output For Circulation Pump Control Activated
Perry-1TXRX0801-P Wall Mounted Radio Receiver 8 Zones
Wall Radio Receiver 8 Zones _ 1 Circulation Pump Output Power Supply Via Bus 16v Receiving Frequency 868.35mhz Manual On/off Control Signal Level Indication Rf Signal For Activated Circulation Pump Control White Colour
Wall Mounted Radio Receiver 1 Zone Perry-1txrx01-p Ric. Rx 1 Zone Wall Mounting Receiving Frequency 868.35mhz Colour White Manual On/off Control Power Supply 230v Ac 50-60hz Output 1 Potential-free Deviation Contact 5(2)a/250v
Perry-1TXRX02-P Receiver 2 Zones With Pump Activation
Receiver 2 Zones - Wall With Pump Activation 30vac 50-60 Hz White Colour Dimensions 90x25x132 Mm Ip30 Carrier Reception Frequency 868,35 Mhz Manual On/off Control Signal Level Indicator Rf Output For Circulation Pump Control Activated
Perry-1TXRX0801-P Wall Mounted Radio Receiver 8 Zones
Wall Radio Receiver 8 Zones _ 1 Circulation Pump Output Power Supply Via Bus 16v Receiving Frequency 868.35mhz Manual On/off Control Signal Level Indication Rf Signal For Activated Circulation Pump Control White Colour
Perry-1TXCCRX01Perry Zone Status Control Unit Zone Status Control Unit 868.35mhz Max 8 Receivers The Control Unit Activates The Load (pump/boiler) With At Least One Electronic Valve Open Power Supply 230v Ac 50hz Signal Level Indication Rf Colour White Perry-1txccrx01 Zone Status Control Unit 868.35mhz Max 8 Receivers The Control Unit Activates The Load (pump/boiler) With At Least One Electronic Valve Open Power Supply 230v Ac 50hz Signal Level Indication Rf Colour White Perry-1txccrx01 white
MPCSHOP.IT is part of
Circuito Mpc Shop | M.P.C. Musso Personal Computer srl - All rights reserved, The reproduction even partial is forbidden| VAT IT 11811400156 |
Html Site Map Mpcshop |
For information and phone orders: +39 0221117815 | Monday-Friday | 9.00 AM - 1.00PM/2.00PM - 6.00PM GMYT +1 | Fax +39 02700520906 |
Zone status control unit
Data: 12 January 2020
